Stone Savior Intensive Cleaner

Stone Savior Intensive Cleaner cleans ceramic tile, marble, granite, limestone, grout, porcelain tile, terra cotta, travertine, tumbled marble, soapstone and flagstone. Stone Savior Intensive Cleaner is a non-acidic formula that can be used for interior and exterior use on residential and commercial projects. It cleans stone and tile floors, walls, and countertops. It will even remove mildew stains from most stone and tile surfaces.

Applications:

• Marble
• Granite
• Slate
• Terra Cotta
• Limestone
• Terrazzo
• Agglomerates
• Sanded Grout

Textures/Surfaces:

• Polished
• Honed
• Flamed/Thermal
• Tumbled
• Cross Cut
• Bush Hammered
• Sawn

Cleaning Dilution Ratios:

Light soil (2 ounces to 1 gallon of warm water)
Medium soil (6 ounces to 1 gallon of warm water)
Heavy soil (10 ounces to 1 gallon of warm water)
Be sure that the surface is free from loose debris and sediment.
Dilute Stone Savior Intensive Cleaner
Wet Mopping or Sponging (Smooth Surfaces):

Apply solution with a clean rayon mop or sponge mop.
Let solution set for two minutes. (On polished marble or limestone let it set for a maximum of one minute.)
Pick up solution with a mop or wet/dry vacuum.
Lightly rinse with water using a clean rayon mop or sponge mop.

Spray Cleaning:

Dilute Stone Savior Intensive Cleaner at 1 ounce per quart of warm water.
Spray onto the stone surface and let it set for two minutes. (On polished marble or limestone let it set for a maximum of one minute.)
Wipe off with a clean soft cloth.
Rinse with Stone Savior Concentrated Floor Cleaner
Automatic Scrubbing (Ceramic, Terra Cotta, Terrazzo, Cement):

Dilute 2 ounces per gallon of warm water.

Use a STONEGLIDE ALPHA Brush on smooth surfaces and a STONEGLIDE BETA Brush on rough surfaces.
Intensive Cleaning:

Follow all of the above procedures and increase the dilution ratio as needed.
Never use Stone Savior Intensive Cleaner undiluted on polished surfaces.
Recommendations:

Always test a small area before using to assure compatibility.
Test Area: Apply Stone Savior Intensive Cleaner to a small area at the project site in accordance to the manufacturer’s directions. Be sure to record all the test results including coverage and stain prevention.
Not for use as a daily cleaner for polished marble.
Approximate Sq. Ft. Gallon (3.785 Liters) Coverage:

Polished Marble & Granite (Mopping) 21,000 square foot
Flamed Granite (Scrubbing) 7,000 square foot
Limestone (Intensive Cleaning w/pressure washer) 10,000 square foot

Benefits:

Non-Toxic
Biodegradable
Excellent hard water tolerance
Non-Staining
Penetrating Action
Fast Acting

Technical Data:

Non-Abrasive
Non-toxic
Non-corrosive
Non-flammable
Excellent hard water tolerance
Safe for food handling areas

Material Data Safety SheetDownload here