Stone Savior Color Enhancer


| /


Stone Savior Color Enhancer is a water-based, stone enhancer and sealer.  It will enhance color and impart stain protection to unpolished natural stone, brick, and masonry surfaces. 


  • Enhances the natural look of pavers and other masonry
  • Imparts excellent water and stain repellency to treated surfaces
  • Suitable for interior and exterior use
  • Effective on horizontal and vertical surfaces


  • One gallon of Enhancer will cover 50sq ft to 200sq ft depending on surface texture and porosity.
  • Always shake the bottle before use
  • Always test each type of surface for appearance and penetration before overall application.
  • Surface to be treated must be clean and dry prior to application.
  • For best results, the surface to be treated must be between 50ºF - 85º at time of application.
  • Do not allow the surface to pool or puddle.  Wipe surface dry within 5 minutes of application to prevent residue buildup.
  • If additional coats are desired/needed, they should be applied wet on wet (within 5-10 minutes of initial application.
  • Apply using a clean white terry cloth towel.
  • Can be sprayed on when applying on a rough surface.
  • Allow 24 hours for the best curing time. 

*Color Enhancer is not a paint or coating, it penetrates.  Excess material that does not penetrate into the surface upon application should be removed immediately.



Material Data Safety Sheet - download here